Windows Vista
1 Click Start
Cameras.
2 If the scanner is listed, Windows recognizes the scanner.
E I N S T A L L T H E S C A N N E R D R I V E R
R
instructions.
Sound and Speaker Problems
Fill out the "Diagnostics Checklist" on page 192 as you complete these
checks.
CAUTION:
safety instructions in the Product Information Guide.
No sound from integrated speakers
A
D J U S T T H E
W
the lower-right corner of your screen. Ensure that the volume is turned up and
that the sound is not muted. Adjust the volume, bass, or treble controls to
eliminate distortion.
A
D J U S T T H E V O L U M E U S I N G K E Y B O A R D S H O R T C U T S
disable (mute) or re-enable the integrated speakers.
E I N S T A L L T H E S O U N D
R
Utilities" on page 139.
No sound from external speakers
N S U R E T H A T T H E S U B W O O F E R A N D T H E S P E A K E R S A R E T U R N E D O N
E
setup diagram supplied with the speakers. If your speakers have volume
controls, adjust the volume, bass, or treble to eliminate distortion.
A
D J U S T T H E
W
icon in the lower-right corner of your screen. Ensure that the volume is turned
up and that the sound is not muted.
I S C O N N E C T H E A D P H O N E S F R O M T H E H E A D P H O N E C O N N E C T O R
D
the speakers is automatically disabled when headphones are connected to the
headphone connector.
134
Troubleshooting
→ Control Panel→ Hardware and Sound→ Scanners and
Before you begin any of the procedures in this section, follow the
I N D O W S V O L U M E C O N T R O L
A U D I O
D R I V E R
(
)
I N D O W S V O L U M E C O N T R O L
See the scanner documentation for
—
Double-click the speaker icon in
—
See "Reinstalling Drivers and
—
Click or double-click the speaker
—
Press <Fn><End> to
—
—
Sound from
—
See the