Haier HWD160-B1558U1 User Manual page 76

Table of Contents

Advertisement

8- Care and cleaning
8.4-1
Note: Tub Clean
After long periods of disuse we recommend to run the "Tub Clean" programme without
a load and a small amount of detergent or a special machine cleaner to remove possibly
corruptive residues.
8.5-1
8.5-2
8.5-3
8.5-4
32
8.4 Long periods of disuse
8.4-2
If the appliance is left idle for a longer period:
1. Pull out the electrical plug (Fig. 8.4-1).
2.
3. Open the doors to prevent formation of moisture
Before next usage carefully check the power cord, wa-
ter inlet and drain hose. Make sure everything is prop-
erly installed and does not leak.
8
A
appliance:
1. Start spinning programme and drain out the water.
2.
3. Open service
4. Provide a at container (1) to catch leach water
5. Pull the drainhose (2) out and hold its end above
6. Take the sealing plug (3) out of the drainhose.
Before any action please ensure water has cooled
down.
and odours. Leave doors open while not in use.
Filter
doesn´t drain the water.
doesn´t spin.
makes unusual noises while running.
and unplug the appliance (Fig. 8.5-2).
screwdriver (Fig. 8.5-3).
(Fig. 8.5-4). There could be bigger amounts!
the container.
WARNING!
8
8
-
the
hot!

Advertisement

Table of Contents
loading

Table of Contents