Dell OptiPlex GX50 User Manual page 85

Leave the release lever extended so that the socket is ready for the new
microprocessor.
M i c r o p r o c e s s o r R e m o v a l
1 Microprocessor chip
2 Release lever
3 Microprocessor socket
NOTICE: Ground yourself by touching an unpainted metal surface on the
back of the computer.
NOTICE: Be careful not to bend any of the pins when you unpack the
microprocessor. Bending the pins can permanently damage the microprocessor.
Unpack the new microprocessor.
6
If any of the pins on the chip appear to be bent, see
instructions on obtaining technical assistance.
Align the pin-1 corner of the microprocessor chip with the pin-1 corner
7
of the microprocessor socket.
NOTE:
You must identify the pin-1 corner to correctly position the chip.
1
2
3
"Getting Help" for
In s ta l l i n g U p gr a d e s
83