Dell OptiPlex GX50 User Manual page 120

118
In s ta l l i n g Up g r a d es
Verify that your computer works correctly by running the
9
Diagnostics.
Small Desktop and Small Mini-Tower Computers
If the replacement drive does not have the bracket rails attached,
1
remove the rails from the old drive by removing the two screws that
secure each rail to the drive. Attach the bracket to the new drive by
aligning the screw holes on the drive with the screw holes on the
bracket rails and tightening all four screws (two screws on each rail).
F l o p p y D r i v e B r a c k e t R a i l s
1 Drive
2 Bracket rails (2)
3 Screws (4)
Gently slide the drive into place until the tabs securely click into
2
position.
Attach the power and data cables to the floppy drive, and connect the
3
other end of the data cable to the connector labeled "DSKT" on the
system board.
Dell
1
2
3