S y s t e m B o a r d J u m p e r
NOTICE:
Make sure that your computer is turned off and unplugged before
you change the jumper setting. Otherwise, damage to your computer or
unpredictable results may occur.
To change the jumper setting to disabled, pull the plug off its pins. To
reenable the setting, carefully fit the plug onto the pins indicated.
S y s t e m - B o a r d J u m p e r S e t t i n g s
Jumper
Setting
PSWD
(default) Password features are enabled.
jumpered
Description
Password features are disabled.
unjumpered
Ad v a n c ed Fe a tu r e s
59