Fisher & Paykel CI302DTB User Manual page 23

3
If no pan is detected on one cooking zone:
The left hand display will still show the selected temperature and the right hand display
z
will still show
If after 10 minutes no pan is detected:
The bridging function will switch off.
z
The cooking zone without a detectable pan will turn off.
z
The remaining cooking zone will continue cooking at the selected heat setting.
z
Using Automatic Cooking in bridged mode
1 Bridge the cooking zones by touching both setting selectors (anywhere) simultaneously.
2 Using the left hand setting selector, select the heat setting.
3 Hold your finger on the control at the selected heat setting until
with the selected setting.
To cancel bridging
1
Sliding the scale down to
the timer for those cooking zones.
Using the timer in bridged mode:
You may only set one timer for the bridged cooking zone. See 'Using the timer'. The timer
indicator will show in both displays.
BRIDGING ZONES
.
0
will not turn off bridging. Cancelling bridging will also cancel
If no pan is detected on either
cooking zone the left hand zone
display will alternate between the
selected setting and
hand selector will show
A
flashes alternately
Touch the setting selectors of both
bridged cooking zones at the same
time. The bridging indicator lights
will go out.
. The right
.
23