Sleep Mode - Dimplex DCPAC09C Instruction Manual

Table of Contents

Advertisement

Functions

SLEEP MODE

• The SLEEP MODE maintains the optimum room temperature without excessive
fluctuations in either temperature or humidity and with quieter operation.
• Fan speed is always LOW, while room temperature and humidity vary gradually to
ensure the most comfortable nights sleep.
• When operating in COOL MODE, the selected temperature will increase by 1°C
per hour in a 2 hour period. This new temperature will be maintained for the next
6 hours. Then the appliance will turn off.
• The SLEEP MODE can be cancelled at any time during operation by pressing the
SLEEP, MODE, or FAN buttons.
• Note: In FAN or DRY modes, SLEEP mode cannot be set.
To set this function:
1. Select COOL MODE as described earlier.
2. Press the SLEEP button (remote control only).
3. When in SLEEP MODE the LED screen will dim and the unit will operate in LOW
fan speed.
SETTING THE TIMER - REMOTE CONTROL ONLY
A timer can be set to automatically turn the appliance ON or automatically turn it
OFF.
To set the unit to automatically turn ON, follow the below instructions:
1. Turn the appliance ON and choose the modes you desire, for example COOLING
MODE, 24°C and high fan speed, then turn OFF the appliance.
2. Press the TIMER button twice, the LCD screen will display 0.5-24 hours and the
'h' symbol will flash.
3. Press the increase (+) or decrease (-) buttons until the desired time is displayed.
Press the TIMER button again to activate.
4. The LED screen will show the set time and the unit is now programmed to turn
ON after "X" amount of hours.
5. To cancel any set timers, press the TIMER button again or the ON/OFF button.
To set the unit to automatically turn OFF, follow the below instructions:
1. While the appliance is running, press the TIMER button, the screen will display
0.5-24 hours and the 'h' symbol will flash.
2. Press the increase (+) or decrease (-) buttons until the desired time is displayed.
Press the TIMER button again to activate.
3. The unit is now programmed to turn OFF after "X" amount of hours.
4. To cancel any set timers, press the TIMER button again or the ON/OFF button.
18

Advertisement

Table of Contents
loading

Table of Contents