TP-Link TL-WR844N User Manual page 65

Chapter 4
3. Enter the information:
1 ) Choose Ping
• Ping is used to test the connectivity between the router and the tested host,
and measure the round-trip time.
• Tracert is used to display the route (path) your router has passed to reach the
tested host, and measure transit delays of packets across an Internet Protocol
network.
2 ) Enter the IP Address
3 ) Modify the Ping Count
keep the default value.
4 ) If you have chosen Tracert, you can modify the
recommended to keep the default value.
4. Click START to begin the diagnostics.
The figure below indicates the proper connection between the router and the Yahoo
server (www. Y ahoo.com) tested through Ping.
The figure below indicates the proper connection between the router and the Yahoo
server (www. Y ahoo.com) tested through Tracert.
or Tracert as the diagnostic tool to test the connectivity.
or Domain Name
number and the
Configure the Router in Wireless Router Mode
of the tested host.
Ping Packet Size. It's recommended to
Traceroute Max TTL. It's
60