TP-Link TL-WR844N User Manual page 136

FAQ
Q1 What should I do if I forget my wireless password?
The default wireless password is printed on the label of the router. If the password has
been altered, please connect your computer to the router using an Ethernet cable and
follow the steps below:
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Wireless or
wireless password.
Q2 How can I restore my router to its factory default settings?
Use a pin to press and hold the
LED blinks to reset the router to its factory default settings.
Q3 What should I do if I forget my login password of the web management
page?
1. Refer to Q2 to reset the router to its factory default settings.
2. Visit http://tplinkwifi.net, and create a password for future login.
Note: You'll need to reconfigure the router to surf the Internet once the router is reset, and please mark down your new
password for future use.
Q4 What should I do if I cannot log in to the router's web management
page?
This can happen for a variety of reasons. Please try the methods below to log in again.
• Make sure your computerthe has connected to the router correctly and the
corresponding LED light up.
• Make sure the IP address of your computer is configured as
automatically and
• Make sure you enter the correct IP address to log in:
• Check your computer's settings:
1 ) Go to Start
status and tasks.
2 ) Click Internet Options
3 ) Click Connections
Advanced > Wireless
RESET button for more than 5 seconds until the Internet
Obtain DNS server address
> Control Panel >
on the bottom left.
and select Never dial a
> Wireless Settings
automatically.
http://tplinkwifi.net
Network and Internet, and click
connection.
or to retrieve or reset your
Obtain an IP address
or 192.168.0.1.
View network
131