Guest Network - TP-Link TL-WR844N User Manual

Chapter 5
• Security - Select an option from the
• None - No security. It is highly recommend you enable the wireless security to
protect your wireless network from unauthorized access.
• WPA-PSK/WPA2-Personal
pre-shared passphrase. It's also the recommended security type.
• WPA /WPA2-Enterprise
• WEP - It is based on the IEEE 802.11 standard.
• Version - Keep default version value.
• Encryption - Select Auto,
• Transmit Power - Select High,
default and recommended setting is High.
• Channel Width - This field determines which operating frequency will be used. It is not
necessary to change the wireless channel unless you notice interference problems
with another nearby access point. If you select auto, then AP will choose the best
channel automatically.
• Channel - This field determines which operating frequency will be used. The default
channel is set to Auto. It is not necessary to change the wireless channel unless you
notice interference problems with another nearby access point.
• Mode - You can choose the appropriate "Mixed" mode.
5 3 2

Guest Network

Guest Network allows you to provide Wi-Fi access for guests without disclosing your
host network. When you have guests in your house, apartment, or workplace, you can
create a guest network for them. In addition, you can customize guest network settings
to ensure network security and privacy.
• Create a Guest Network
1 Visit http://tplinkwifi.net, and log in with the password you set for the router.
2 Go to Wireless or
3 Enable the 2.4GHz
Security
- It's the WPA/WPA2 authentication type based on
- It's based on Radius Server.
TKIP or AES. We recommend you keep the default settings.
Middle or
Advanced > Wireless
Guset Network.
Configure the Router in WISP Mode
drop-down list.
Low to specify the data transmit power. The
> Guest Network.
80