①
②
③
④
Pos. 10
Pos. 20
Pos. 60
Figure 5-5
1. Using flat-nose pliers, pull off all expanding rivets
2. Pull off the two expanding rivets
3. Using flat-nose pliers, pull off all expanding rivets
5.10.3
Removing the dust protection cover of the inverter cabinet
Note
All Makrolon parts that need to be removed are marked with a red sticker and the item number.
SINAMICS SM150 6SL3815-7NP41-0AA1
Operating Instructions Rev.201910281301 EXAMPLE
Expanding rivets
Expanding rivets
Expanding rivets
Overall configuration, curtain
Makrolon plate, center front
Makrolon strip, left
Makrolon strip, right
Dust protection cover, closed-loop control cabinet
"Pos. 10".
curtain.
Pos. 60" and remove the side strips.
5.10 Removing the dust protection cover
①
and remove the Makrolon plate
②
④
of the curtain
using flat-nose pliers, and remove the
③
of the two Makrolon strips "Pos. 20,
Installation
95