CONNECTION
Figure 4-1
2. Remove inverter top cover.
3. Remove the I/O Board (2) (as shown in Figure 4-2).
4. Remove the Filter Board (1) (as shown in Figure 4-2).
Figure 4-2
5. Using a hammer and a flat-head screwdriver (as shown in Figure 4-3) strike
the gland plate or "knockout".
Warning
!
The PROFIBUS module MUST be mounted on the inverter on the opposite side to
the Rating Label.
32
Removing Inverter cover
Removing the Filter and I/O Boards
PROFIBUS Communication Module
Issue 03/02
Operating instructions
6SE6400-5AV00-0BP0