Environmental Requirements - DataCard ImageCard User Manual

2-4
The clearance required is:
•
•
•

Environmental requirements

The Magna Class printer requires the following environmental
conditions for optimal operation:
•
•
10.5 in
(26.7 cm)
3 in
(7.5 cm)
6 in
(15.3 cm)
Figure 2-2: Magna Class ML and M2L models dimensions and
3 inches (7.5 cm) in back of the printer, for an overall depth of
13.25 inches (31.1cm)
6 inches (15.3 cm) on the left end of the printer and 2 inches (5.1
cm) on the right (output) end to remove the card cartridge and
card output stacker. The overall width needed for the M and M2
models is 34.75 inches (88.3 cm) and the overall width for ML
and M2L models is 42.75 inches (109.7 cm).
10.5 inches (26.7 cm) above the printer to allow the cover to
open, for an overall height from the work surface of 23.75 inches
(60.3 cm).
Operating relative humidity: 20% to 80% non-condensing
Operating temperature range: 55° F to 95° F (13° C to 35° C)
34.75 in
(88.3 cm)
clearance
User's Guide for the Magna™ Class Printer
Getting started
10.25 in
(26.1 cm)
13.25 in
(33.7 cm)
2 in
(5.1 cm)