DataCard ImageCard User Manual page 14

1-6
Card output stacker
The card output stacker holds the cards after they have been
processed. Both completed cards and rejected cards go to the card
output stacker.
Cover
The cover protects the internal parts of the printer from dust and
debris. It also lessens the sound from the printer.
Overlay module
The overlay module is part of all ML and M2L printer models. The
overlay module applies a die-cut polyester patch to one or both sides
of the card after it has been personalized. You can choose the
DuraGard™ protective overlay or a holographic overlay. Both provide
a durable and long-lasting protective surface to the card. The
holographic overlay includes a tamper-evident image.
Ready button
The Ready button allows you to pause the printer while printing a
card, to clear an error condition, to cancel a print job and delete all
data for the job, or to create a printer test card.
•
•
To pause the printer, press and hold the Ready button for three
seconds or less. Any cards being printed complete the current
operation and stop. The status light continues to blink green while
the printer is paused.
i
If the printer is paused and a message box is displayed on the
PC, use the buttons on the message box to clear the message. If
you press the Ready button to clear the error, the current print job
is cancelled. If you press the Ready button to clear a pause
condition, the job is not cancelled.
To cancel and clear the current print job, press and hold the
Ready button for between three and ten seconds. When the
sound changes tone, release the Ready button. The job is
cleared from printer memory and the card is ejected.
User's Guide for the Magna™ Class Printer
Overview