Alfa Romeo STELVIO Owner's Handbook Manual page 83

Hide thumbs Also See for STELVIO:
Table of Contents

Advertisement

or, in a lower number of cases, they could deploy erroneously. Before proceeding, contact an Alfa Romeo Dealership to have the system checked
immediately.
12) If the symbol switches on while driving, stop the car and the engine immediately.
Amber warning lights
Warning light
ABS FAILURE
The warning light switches on when the ignition device
is brought to ON, but it should switch off after a few
seconds.
The warning light switches on to indicate an ABS fault.
In this case the braking system maintains its efficiency
unaltered but without the advantage of the ABS system.
TPMS FAILURE
The warning light switches on when a failure is detected
in the TPMS. Should one or more wheels be fitted
without sensors, the display will show a warning message
until initial conditions are restored.
Tyre pressure low
The warning light switches on to indicate that the tyre
pressure is lower than the recommended value and/or
that slow pressure loss is occurring. In these cases,
optimal tyre duration and fuel consumption may not be
guaranteed.
IMPORTANT
What it means
What to do
Drive carefully and contact an Alfa Romeo Dealership as
soon as possible.
Do not continue driving with one or more flat tyres as
handling may be compromised. Stop the vehicle, avoiding
sharp braking and steering. Immediately restore the
correct inflation pressure using the Tire Repair Kit (see
"Repairing a wheel" paragraph in the "In an emergency"
chapter) and contact the dedicated Alfa Romeo
Dealership as soon as possible.
In any situation in which the message on the display is
"See manual", it is ESSENTIAL to refer to the contents of
the "Wheels and rims" paragraph in the "Technical data"
chapter, strictly complying with the indications that you
find there.
81

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents