Alfa Romeo STELVIO Owner's Handbook Manual page 42

WARNING Turning the ignition switch
to ON turns off the parking lights, which
were on only on one side.
HEADLIGHTS OFF TIMER
The "Follow Me" function delays the
switching off of the headlights after the
car has been stopped.
The function can be enabled from
the Connect system by selecting the
following functions from the main
menu in sequence: "Settings", "Lights"
and "Follow me"; the side lights and the
dipped beam headlights stay on for a
time that can be set between 30, 60 and
90 seconds.
Function activation
With the headlights on, take the ignition
device to the STOP position: the timer
starts when the light switch is turned to
the position.
WARNING To activate this function the
headlights must be deactivated within
2 minutes after the ignition device has
been taken to STOP.
Function deactivation
This function is deactivated by switching
on the headlights, the side lights or
bringing the ignition device to ON.
AFS FUNCTION
(Adaptive Frontlight System)
(where provided)
This is a system combined with Xenon
40
headlights (Bi-Xenon Headlamps 35 W
version) which directs the main light
beam, horizontally and vertically,
and continuously and automatically
adapts it to the driving conditions round
bends/when cornering.
The system directs the light beam to
light up the road in the best way, taking
into account the speed of the car, the
bend/corner angle and the speed of
steering.
The adaptive lights are automatically
activated when the car is started.
MAIN BEAM HEADLIGHTS
To switch on the fixed main beam
headlights, push the left stalk forwards
towards the instrument panel fig. 47. The
light switch must be turned to
With main beam headlights on, the
warning light/icon on the instrument
panel will come on at the same time.
47
The main beam headlights are switched
off by pushing the left stalk forward
again. The warning light/icon
on in the instrument panel.
Blinking
The flashing of the main beam headlights
is activated by pulling the left stalk
towards the steering wheel, the lights
remain on while you are operating the
lever.
Automatic high beam (AHB system)
headlights
(where provided)
The AHB system is used to switch
the high beam headlights on and off
automatically and to adapt the lighting
near towns.
or .
Function enabling
This function is enabled using the "Driver
Assistance" Menu and then selecting
"Comfort" in the Connect system with
the light switch turned to position
Function activation
The first time the main beam headlights
are activated (pushing the left lever)
the function is activated (green warning
light or the symbol
display).
If the main beam headlights are actually
on, the warning light/icon
04126S0020EM
come on in the instrument panel.
switches
.
comes on the
will also