Alfa Romeo STELVIO Owner's Handbook Manual page 53

Air temperature adjustment
Turn knob 1 or 9 to the right or left
to adjust the air temperature in the
front left area (knob 1) and in the front
right area (knob 9) of the passenger
compartment. The set temperatures are
shown on the Connect system.
Press the SYNC button to align the air
temperature between the two zones.
Turn knob 9 to return to the separate
management of air temperatures in the
two zones.
Turn the knobs fully clockwise or
anticlockwise to activate HI (maximum
heating) or LO (maximum cooling)
respectively. To deactivate these
functions, turn the temperature knob to
the desired temperature. All of the vents
have the same outlet air temperature.
Air distribution selection
Pressing buttons 3 and 7 for the left side
and right sides respectively, you can set
one of the 7 possible distribution modes:
Air flow to the windscreen
and front side window vents
to demist/defrost them.
Air flow at central and side
dashboard vents to ventilate
the chest and the face during
the hot season.
Air flow to the front and
rear footwell vents. This air
distribution setting heats
the passenger compartment
most quickly, giving a prompt
sensation of warmth.
Air flow distributed between
footwell vents (hotter air) and
central and side dashboard
vents (cooler air). This air
distribution setting is useful
in spring and autumn on
sunny days.
Air flow distributed
between footwell vents and
windscreen and front side
window defrosting/demisting
vents. This distribution
setting allows the passenger
compartment to be warmed
effectively and prevents the
windows from misting.
Air flow distribution
between windscreen
demisting/defrosting
vents and side and central
dashboard vents. This
allows air to be sent to the
windscreen in conditions of
strong sunlight.
Air flow distribution to all
vents on the vehicle.
In AUTO mode, the air conditioner
automatically manages the air
distribution. When set manually, the
air distribution is indicated by the
respective symbols on the Connect
system display switching on.
Fan speed adjustment
Turn knob 5 to increase/decrease the
fan speed. The speed is displayed by the
lighting up of the symbols on the Connect
system display.
maximum fan speed = all LEDs lit;
minimum fan speed = one LED lit.
The fan can be excluded by rotating
knob 5 to position O (all segments on the
Connect system display are turned off).
WARNING To restore automatic
control of the fan speed after a manual
adjustment, press the AUTO button.
AUTO button
When the AUTO button is pressed (LED
on button lit) the climate control system
automatically adjusts the following
settings in the corresponding zones:
quantity and distribution of the
air introduced into the passenger
compartment;
climate control compressor;
air recirculation;
cancels any previous manual settings.
This is indicated by the LED on the AUTO
button switching on.
Selecting the AUTO function turns on the
LED on the compressor on/off switch.
51