Speed Limiter - Alfa Romeo STELVIO Owner's Handbook Manual

Hide thumbs Also See for STELVIO:
Table of Contents

Advertisement

(battery monitoring) installed on the
negative terminal of the battery itself.
This sensor should never be
disconnected from the pole except if the
battery is replaced.
174
WARNING After setting the starter
switch to STOP and having closed
the driver side door, wait at least
1 minute before disconnecting the
electrical supply from the battery. When
reconnecting the electrical supply to the
battery, make sure that the ignition
device is in the STOP position and the
driver side door is closed.
WARNING
128) When replacing the battery, always
contact an Alfa Romeo Dealership. Replace
the battery with a new one of the same type
(HEAVYDUTY) and specifications.
IMPORTANT
37) If climate comfort is to be favoured, the
Start&Stop system can be deactivated,
for a continuous operation of the climate
control system.

SPEED LIMITER

DESCRIPTION
This device allows the speed of the car to
be limited to values which can be set by
the driver.
The maximum speed can be set both with
vehicle stationary and in motion. The
07126V0002EM
minimum speed that can be set is 20 mph
(30 km(h).
When the device is active, the car
speed depends on the pressure at the
accelerator pedal, until the programmed
speed limit is reached (see "Speed limit
programming" paragraph).
ACTIVATING THE DEVICE
The device can be activated/deactivated
using the "Driver Assistance" menu and
then selecting "Comfort" on the Connect
system.
Activating the device
The activation of the device is signalled
by the displaying of the green symbol
along with the last speed set fig. 175.
The Speed Limiter function can remain
active concurrently with the Cruise
Control system. If a speed limit below
the one indicated in the Cruise Control is
selected, the Cruise Control speed will be
lowered to that of the Speed Limiter.
This function remains available in RACE
mode.
175
SPEED LIMIT PROGRAMMING
The speed limit can be programmed on
the Connect system.
To access the function, on the main menu
select the following items in sequence:
"Settings", "Safety" and "Speed Limiter -
Set Speed".
By turning the Rotary Pad, the speed
increases by 5 mph (5 km/h), on rotation,
from a minimum of 20 mph (30 km/h) to a
maximum of 110 mph (180 km/h).
EXCEEDING THE PROGRAMMED
SPEED
By fully depressing the accelerator
pedal, the programmed speed can be
07136S0057EM
161

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents