User Selectable Features - Directed Electronics Intelliguard 950 Owner's Manual

n n o o t t e e : : Refer to the Feature Descriptions sections of this guide for impor-
tant notes and descriptions of the system features and programming.
7. Exit programming - To exit programming mode turn the igni-
tion off or wait 60 seconds without pressing the PlainView 2
Valet switch. The siren will chirp three times to indicate pro-
gramming mode has been exited.

user selectable features

First
Press
Then
Press
Add new remote
(autolearn)***
Auto (passive)
arm on/off
on/off/quiet
Auto lock
ignition/off/rpm
Auto unlock
ignition/off
Auto (passive)
arm and lock
Not used
Second unlock
Not used
* This feature is only available with optional IntelliStart connected.
** This feature is only available with optional SmartWindows connected.
*** 5-button Radar 2 only. To program 4-button remote use New remote learn in column 3.
**** This feature is not evaluated by Thatcham.
© 2 0 0 4 d i re c t e d e l e c t ro n i c s , i n c .
Change PIN code
Not used
Chirps
Not used
Remote valet
on/off
Entry delay on/off
Reset all features to
factory (except re-
motes and PIN code)
on/off
Not used
Autostart setting*
(off/battery only/
on/off temp only/
battery and temp)
BlackJax on/off****
New remote learn
arm/disarm only
New remote learn
accessory A channel
New remote learn
accessory B channel
New remote learn
silent mode
New remote learn
remote valet
New remote learn
remote start*
New remote learn
window down/vent**
New remote learn
accessory C channel
Clear all remotes
23