System Sensors And Adjustments - Directed Electronics Intelliguard 950 Owner's Manual

5. Turn ignition off, siren chirps 3 times as confirmation of exit-
ing programming.
n n o o t t e e : : If ignition remains on after entering PIN code and no action for
10 seconds, unit will automatically exit programming mode without
chirps.
blackjax* off warning indicator
Each time the ignition is turned off when BlackJax is bypassed the LED
will flash 10 times as warning that the BlackJax has been temporarily
bypassed.

system sensors and adjustments

Your system was installed with a Tilt/Motion sensor and one of 3 dif-
ferent sensor configuration options. Either, Digital Dual Zone proximity
sensor, Ultrasonic sensor, or Glass Tamper sensor.
Tilt/Motion Sensor
being raised in an attempt to either remove the wheels/tires or
tow the vehicle. This sensor is capable of learning the vehicle's ini-
tial angles of vertical and horizontal inclination each time the
vehicle is parked.
Proximity Sensor : The digital dual-zone proximity sensor uses dig-
ital signal processing to detect mass movement inside the pas-
senger compartment and very near the vehicle. The sensor is
impervious to air movement so it is ideal for use on convertible
vehicles.
* This feature is not evaluated by Thatcham
© 2 0 0 4 d i re c t e d e l e c t ro n i c s , i n c .
The 507T sensor detects when the vehicle is
:
35