Table of Contents
Advertisement
Power Saver in Valet Mode: When the system enters Valet
Mode the LED illuminates steadily. If the vehicle is not used
(ignition is not turned on) for a period of one hour while the
system is in Valet Mode, the LED will shut off. If the system
remains in Valet Mode, the LED will come back on the next
time the ignition is turned on and then back off.
programming options
Programming options control what your system does during normal
operation, and require few or no additional parts. However, some may
require additional installation labour.
Following is a list of the program settings, with the factory settings in bold:
Active arming (only with the transmitter) or passive arming
(automatic arming 30-seconds after the last door is closed).
Arming/disarming confirmation siren chirps on, off, or
quiet.
Auto-Lock on/off/rpm
ON: The doors will lock three seconds after the ignition is
turned on unless a door is open.
RPM: The doors will lock when the engine speed increases.
Auto-Unlock on/off: With this feature on, the doors will
unlock when the ignition is turned off.
Passive door locking (with passive arming) or active door
locking (only when arming with the transmitter). Passive
locking allows the vehicle's doors to lock when the security
20
Advertisement
Table of Contents
