Procedure to Remove Outside Panels and Related Parts
1. Procedure to Remove Outside Panels and Related
Parts
Procedure
Step
1
Remove the front panel
2 (the front panel of the
side panel), after
removing the 1 screw
and pushing the front
panel downward.
2
Remove the top panel,
after removing the 8
screws.
Remove the front panel
3
1, after removing the 7
screws.
4
Remove the right side
panel, after removing
the 5 screws.
Remove the front panel
5
of the piping cover,
after removing the 1
screw.
Remove the side panel
6
of the piping cover,
after removing the 4
screws.
7
Hold the lower part (2
positions) and pull
frontward. Remove
from the top hooks
using a flathead
screwdriver etc. and
then pull downward the
whole suction grille to
remove it.
2
Warning
Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure
Top panel
Front panel 1
Hooks
Suction grille
Right
panel
Front panel 2
Side panel of
piping cover
Front panel of
piping cover
Si281311
Points
Removal Procedure