Procedure To Remove Pcb Assy (1) - Daikin RZQ71KBV1 Service Manual

Si281311

4. Procedure to Remove PCB Assy (1)

Procedure
Step
Remove the top panel,
the front panel 2, the side
panel, and the piping
cover, following the
procedure indicated at
"Removing Outside
Panels and Related
Parts".
Remove the switch box,
following the procedure
indicated at "Removing
switch box".
1. Remove the PCB for the
display (A2P)
Remove the
1
connectors (X205A)
on the PCB for the
display.
Since the PCB for
the display (A2P) is
fixed with 2 hooks,
take from them and
then remove the
PCB for the display.
Removal Procedure
Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure
PCB for the display
Connector
(X205A)
PCB for the display (Retrieved)
Procedure to Remove PCB Assy (1)
Outdoor
unit PCB
Installation section of the
Hooks
PCB for the display (A2P)
Hook
Resin case
Points
PCB
5