Procedure To Remove Outside Panels - Daikin RZQ100KAVLT Service Manual

Procedure to Remove Outside Panels

1. Procedure to Remove Outside Panels
Procedure
Step
1 Pull the 7 tabs at the
bottom of the suction
grille to the front, and
then disengage the tabs
at the top with a
screwdriver or else.
After that, hold down
the whole suction grille
to remove it.
Unscrew the 1 screw
2
that fixes the front panel
(2) (i.e., the front panel
on the side), and then
remove this front panel.
3 Unscrew the 8 screws
that fix the top panel,
and then remove the
top panel.
4 Unscrew the 7 screws
that fix the front panel
(1), and then remove
this front panel.
5 Unscrew the 1 screw
that fix the front piping
cover bracket, and then
remove this bracket.
6 Unscrew the 4 screws
that fix the side piping
cover bracket, and then
remove this bracket.
7 Unscrew the 5 screws
that fix the side rear-
panel, and then remove
this panel.
2
Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure
Top panel
Front panel (1)
Front panel (2)
Points
Tabs
Suction grille
Side piping cover
bracket
Front piping cover
bracket
Removal Procedure
Si281315E
Side rear-panel