Power Saver Mode
Your system will automatically enter Power Saver Mode while
armed or in Valet
®
Mode, after a period of time in which no oper-
ation has been performed. This lowers the current draw on the
vehicle's battery and prevents the system from draining the bat-
tery. Power Saver Mode takes over under the following conditions:
s
Power Saver when the system is armed: After the system has
been armed for 24 hours the LED will flash at half its normal
rate, decreasing the system's current draw.
s
Power Saver in Valet
Mode the LED illuminates steadily. If the vehicle is not used
(ignition is not turned on) for a one hour period while the
system is in Valet
remains in Valet
time the ignition is turned on and then back off.
26
®
Mode: When the system enters Valet
®
Mode, the LED will shut off. If the system
®
Mode, the LED will come back on the next
1999 Directed Electronics, Inc.
©
®