Directed Electronics Automate 553 Owner's Manual page 35

Shock Sensor: This system is packaged with a Stinger ™
DoubleGuard ® shock sensor. This sensor is mounted in the vehicle
and designed to pick up impacts to the vehicle or glass.
Siren: Noise generating device usually installed in the engine
compartment of the vehicle. It is responsible for generating the
"chirps" you hear, as well as the six tones you hear while the alarm
is triggered.
Transmitter: Hand-held, remote control which operates the vari-
ous functions of your system.
Trigger or triggered sequence: This is what happens when the
alarm "goes off" or "trips." The triggered sequence of your system
consists of 30 seconds of siren sounding and parking light flashing.
Valet ® Switch: A small push button switch mounted somewhere
inside the vehicle. It is used to override the alarm when a trans-
mitter is lost or damaged, or to put it into Valet ® mode.
Warn Away ® response: Lighter impacts to the vehicle will gener-
ate the Warn Away ® response. It consists of several seconds of
siren chirps and parking light flashes.
Zone: A zone is a separate input that the alarm can recognize as
unique. Each input to the system is connected to a particular
zone. Often two or more inputs may share the same zone.
32
1999 Directed Electronics, Inc.
©