Using The Configuration Menu - D-Link DWL-6000AP Manual

Using the Configuration Menu

Using the Configuration Menu Using the Configuration Menu
Using the Configuration Menu Using the Configuration Menu
(During configuration, please always remember to click Apply to save the changes.)
Whenever you want to configure your network or the DWL-6000AP, you can access
the Configuration Menu by opening the web-browser and typing in the IP Address of
the DWL-6000AP. The DWL-6000AP default IP Address is shown below:
Note: if you have changed the default IP Address assigned to the DWL-6000AP,
The Home>Wizard screen will
appear. Please refer to the Quick
Installation Guide for more infor-
mation regarding the Setup Wiz-
ard.
Here the Home> Wireless tab is
displayed. If you wish to change
the default settings, you can
make changes to these items, as
shown on the following page.
Open the web browser
Type in the IP Address of
the Access Point
make sure to enter the correct IP Address.
Type admin (lower case) in
the User Name field
Leave the Password
blank
Click Next
Home > Wizard Home > Wizard Home > Wizard
Home > Wizard Home > Wizard
Home > Wireless Home > Wireless
Home > Wireless Home > Wireless Home > Wireless
admin admin
14