D-Link DWL-6000AP Manual page 54

T T T T T r r r r r oublesh oublesh oublesh oubleshootin ootin ootin ooting g g g g
oublesh ootin
2. The wireless client cannot access the Internet in the 2. The wireless client cannot access the Internet in the 2. The wireless client cannot access the Internet in the
2. The wireless client cannot access the Internet in the 2. The wireless client cannot access the Internet in the
Infr Infr astru astru ctur ctur
Infr Infrastru Infr astructur astru ctur cture m
Make sure the wireless client is associated and joined with the correct Access
Point. To check this connection: Right-click on the Local Area Connection icon
in the taskbar> select View Available Wireless Networks. The Connect to
Wireless Network screen will appear. Please make sure you have selected the
correct available network, as shown in the illustrations below.
• Check that the IP Address assigned to the wireless adapter is within the same IP
Address range as the access point and gateway. (Since the DWL-6000AP has an
IP Address of 192.168.0.50, wireless adapters must have an IP Address in the
same range, e.g., 192.168.0.x. Each device must have a unique IP Address; no
two devices may have the same IP Address. The subnet mask must be the same
for all the computers on the network.) To check the IP Address assigned to the
wireless adapter, double-click on the Local Area Connection icon in the taskbar
> select the Support tab and the IP Address will be displayed. (Please refer to
Checking the IP Address in the Networking Basics section of this manual.)
• If it is necessary to assign a Static IP Address to the wireless adapter, please
refer to the appropriate section in Networking Basics . If you are entering a DNS
Server address you must also enter the Default Gateway Address. (Remember
that if you have a DHCP-capable router, you will not need to assign a Static IP
Address. See Networking Basics: Assigning a Static IP Address.)
e m e m od ode e e e e . . . . . od od
e m e mod
default
54