D-Link DWL-6000AP Manual page 4

In In In In In tr tr tr tr tr od od od u u u u u cti od od
The new D-Link Air Pro DWL-6000AP Multimode Wireless Access Point is a
multimode access point that simultaneously serves both 802.11a wireless
connectivity at up to 54 Mbps (108 Mbps in Turbo mode
connectivity at up to 11Mbps (22 Mbps with D-Link Air Plus products .)
In addition to identifying and communicating with other 802.11a and 802.11b
wireless devices, the D-Link Air Pro DWL-6000AP access point also builds a
bridge between wireless and wired network segments with its integrated 10/
100 Ethernet port. The multimode access point will automatically obtain an IP
address and forward additional IP addresses to multiple clients for a seamless
Ethernet network connection and shared Internet access.
Armed with powerful management and security capabilities, the D-Link Air Pro
DWL-6000AP has an intuitive and secure web-based interface that is powered
by an embedded web server. You can also manage your network with the AP
Manager which is available on the CD that is included in your package. Advanced
security is offered 802.1x support.
After completing the steps outlined in the Quick Installation Guide (included in
your package) not only will you have the ability to share information and
resources, but you will also be able to enjoy the freedom that wireless networking
delivers, at speeds capable of handling a video stream.
* When used with other D-Link Air Pro products.
*Maximum wireless signal rate based on IEEE Standard 802.11b specifications. Actual data
throughput will vary. Network conditions and environmental factors, including volume of
network traffic, building materials and construction, and network overhead lower actual data
throughput rate.
cti cti on on on
cti cti on on
*
) and 802.11b wireless
4