D-Link DWL-6000AP Manual page 35

Networking Basics Networking Basics
Networking Basics Networking Basics Networking Basics
Assigning a Static IP Address Assigning a Static IP Address Assigning a Static IP Address Assigning a Static IP Address Assigning a Static IP Address
in in in in in Windows XP/2000 Windows XP/2000 Windows XP/2000
Windows XP/2000 Windows XP/2000
Click on Internet Protocol
(TCP/IP)
Click Properties
Select Use the following IP
address in the Internet
Protocol (TCP/IP) Properties
window (shown below)
Input your IP address and
subnet mask. (The IP
Addresses on your network
must be within the same
range. For example, if one
computer has an IP Address
of 192.168.0.2, the other
computers should have IP
Addresses that are
sequential, like 192.168.0.3
and 192.168.0.4. The
subnet mask must be the
same for all the computers
on the network.)
Input your DNS server
addresses. (Note: If you
are entering a DNS
server, you must enter the
IP Address of the Default
Gateway.)
The DNS server information will be supplied
by your ISP (Internet Service Provider.)
Click OK
35