D-Link DWL-6000AP Manual page 11

Gettin Gettin g Started g Started
Gettin g Started g Started
Gettin Gettin g Started
Right out of the box, with its default setti
automatically connect with other D-Link
Note: If you are using a DHCP-capable router in your network setup,
such as the DI-604, you will not need to assign a static IP Address.
If you need to assign IP Addresses to the computers on the network,
please remember that the IP Address for each computer must be in
the same IP Address range as all the computers in the network, and
the Subnet mask must be exactly the same for all the computers in the
network.
For example: If the first computer is assigned an IP Address of
192.168.0.2 with a Subnet Mask of 255.255.255.0, then the second
computer can be assigned an IP Address of 192.168.0.3 with a Subnet
Mask of 255.255.255.0, etc.
IMPORTANT: If computers or other devices are assigned the same
IP Address, one or more of the devices may not be visible on the
network.
An Infrastructure
Infrastructure Network example, shown here, contains the following D-Link
network devices:
A wireless Access Point - D-Link Air Pro DWL-6000AP
An Ethernet Broadband Router - D-Link DI-604
A laptop computer with a wireless adapter - D-Link Air Pro DWL-A650
A desktop computer with a wireless adapter - D-Link Air Pro DWL-A520
A Cable modem - D-Link DCM-200
IP ADDRESS IP ADDRESS IP ADDRESS
IP ADDRESS IP ADDRESS
wireless network contains an Access Point. The
11