Getting Started - D-Link DWL-6000AP Manual

Getting Started

Getting Started Getting Started Getting Started Getting Started
Please refer to the following
sections of this manual for
additional information about
setting up a network:
Networking Basics - learn Networking Basics Networking Basics
Networking Basics Networking Basics
how to check and assign
your IP Address; share
printers and files.
Using the Configuration Using the Configuration Using the Configuration Using the Configuration Using the Configuration
Menu Menu
Menu - learn the settings for Menu Menu
the DWL-6000AP, using the
web-based interface.
Troubleshooting - learn how Troubleshooting Troubleshooting
Troubleshooting Troubleshooting
to check for common
installation issues and other
tips for troubleshooting.
Please remember that D-Link Air Pro wireless devices are pre-configured to connect
together, right out of the box, with the default settings.
For a typical wireless setup at home (as shown above,)
You will need a broadband Internet access (Cable/DSL) subscription
Consult with your Cable/DSL provider for proper installation of the modem
Connect the modem to an Ethernet broadband router such as the
DI-604 ( see the Quick Installation Guide included with the DI-604. )
Connect the router to the D-Link Air Pro DWL-6000AP ( see the Quick
Installation Guide included with the DWL-6000AP. )
If you are connecting a desktop computer in your network, you can install the
D-Link Air Pro DWL-A520 wireless PCI adapter into an available PCI slot.
(See the Quick Installation Guide included with the DWL-A520.)
Install the drivers for the wireless cardbus adapter (D-Link Air Pro DWL-A650)
into the laptop computer ( see the Quick Installation Guide included
with DWL-A650. )
2 2 2 2 2
4 4 4 4 4
6 6 6 6 6
please do the following:
1 1 1 1 1
3 3 3 3 3
5 5 5 5 5
12