IBM 5594-1AX Installation And User Manual page 33

Table 1. User settings (continued)
Submenu
Battery settings Automatic battery
test
Low battery warning [10 %] [20 %] [30 %]
Restart battery level
Battery charge mode
EBM number setting
Deep discharge
protection
Available settings Default settings
Every week (in
[No test] [Every day]
constant charge)
[Every week] [Every
otherwise following
month]
ABM
Available only if
battery charge mode
is set to constant
charge.
[20%]
[40 %] [50 %] [60 %]
[70 %] [80 %] [90 %]
The alarm triggers
when the set
percentage of battery
capacity is reached
during a back-up
time.
[10 %] [20 %] [30 %] [0%]
[40 %] [50 %] [60 %]
[70 %] [80 %] [90 %]
[100 %]
If set, automatic
restart will occur
only when
percentage of battery
charge is reached.
[ABM cycling] [ABM cycling]
[Constant charge]
[0] [1] [2] [3] [4] EBM automatic
detection, otherwise
Using standard EBM,
[0]
UPS detects
automatically the
amount of EBM
connected.
[Yes] [No] [Yes]
If set to Yes, the UPS
automatically
prevents battery from
deep discharge by
adapting end of
back-up time voltage
threshold.
Chapter 2. Presentation
17