IBM 5594-1AX Installation And User Manual page 27

Operation
status
Load/equipment
status
Efficiency: 95%
Efficiency and load group
The following table describes the status information provided by the UPS.
Note: If an other indicator appears, see Chapter 7, "Troubleshooting and
maintenance," on page 35 for additional information.
Online mode
50%
5.0kW
5.5kVA
information
Operation status
Standby mode
Normal mode
In AVR mode
Load protected LED is on
No beep
100%
Battery
8min
status
1EBM
Cause
The UPS is OFF, waiting for
start-up command from the
user.
The UPS is operating
normally.
The UPS is operating
normally but the utility
voltage is outside normal
mode thresholds.
Description
Equipment is not powered
until button is pressed.
The UPS is powering and
protecting the equipment.
The UPS is powering the
equipment through an
Automatic Voltage
Regulation device.
The equipment is still
normally protected.
Chapter 2. Presentation
11