Table of Contents
Advertisement
Internet Server User' s Guide
Using a Browser to Configure the
Server
Once your PC is configured with an IP address on the same subnet
as the internet server, start your browser program and enter the
prefix "http://" followed by the IP address assigned to the server, in
the address window.
You should immediately see the internet server web browser inter-
face menu as shown below. Note that the internet server IP address
can be bookmarked for future access so that it doesn't need to be
entered each time.
The browser interface uses frames, so it is best if you use a frames-
capable browser program. Also, we advise you to temporarily sus-
pend the use of proxies – if you are using them – while accessing the
20
Telnet session and restarts the internet
server in the new configuration.
System Setup
Advertisement
Table of Contents
