Using Telnet to Configure the
Server
Once your PC is configured with an IP address on the same subnet
as the server (or vice-versa), start your Telnet program and connect
to the IP address of the internet server. The following screen will
appear:
Press the <Enter> key to access the configuration program. There is
no default password.
numbers to navigate the menus and change settings. All settings
are described later in this manual.
Note:
System Setup
Once you have access, use the menu item
Make sure to save the configuration after
modifying device settings. The Save Con-
figuration function immediately ends the
Internet Server User' s Guide
19