D-Link DP-601M User Manual page 19

Mandatory Settings for Internet Access
Step 8: ISP Account -> Phone Number, when you signed-up for
an account with your ISP (internet service provider), you
should have been given an access phone number that your
Internet server's built-in modem will dial. Look under the
"WAN Port Settings" menu for this item and enter the
phone number provided by your ISP.
Step 9: ISP Account -> User ID, your ISP should also have a s-
signed a User ID (aka, a username) that you will use for
logging-in. Also under "WAN Port Settings," enter this user
ID exactly as it was provided to you.
Step 10:
ISP Account -> Password, finally, to complete the ISP
login process, the internet server must provide the password
associated with the user ID assigned by your ISP. Enter it.
You have now completed the basic steps necessary to install, config-
ure, and begin using the internet server. Note that, with respect to
steps 8–10, it may be necessary for you to use a "Login Script" in-
stead. If you enter the information required in those three settings
correctly and still have trouble logging-in, see the "Login Script"
section on page 24 to create a login script.
Quick Installation
Internet Server User' s Guide
xvii