Server Address Configuration - D-Link DP-601M User Manual

Internet Server User' s Guide
Description: The IP reserve table specifies ownership of par-
ticular IP addresses by particular stations or servers
(identified by MAC address) so that those IP addresses will not
be used by other devices on the LAN under any circum-
stances. (Note that devices listed in the Server Address
Settings table should have their IP addresses listed here if
DHCP is going to be used so that their IP addresses don't get
assigned to other network stations.)

Server Address Configuration

The Server Address Configuration table allows you to setup local
servers, for example an FTP or web site, and provide non-local access
to them through the internet server. Entries in the table associate a
port number with the local IP of a particular LAN server so that
users not on the LAN can access that server.
The internet server supports virtual internet servers so that your
single-point ISP internet access can be used to provide externally-
accessible servers for FTP and HTTP. "Virtual Servers" in this
context are "virtual" because they don't have their own public d o-
main IP addresses in the typical internet fashion. Rather, their local
IP address, with an access port number, is listed in a table inside the
internet server. The port number provides the internet server with
the reference to correctly route data requests.
Note that in LAN-to-LAN mode, this function is disabled and no
LAN devices can be accessed from the internet.
No.
Item number used for entry editing. Maximum of 16 e n-
tries.
Local IP Address
40 Configuration Settings