Filter Netbios Over Tcp/Ip - D-Link DP-601M User Manual

Internet Server User' s Guide
LAN IP address of the internet server as its default gate-
way. In the internet server, you must add static routes into
the routing table to the other IP networks or IP subnets
that the router is routing between. Use the router's LAN
IP address as the gateway for the static routes to the other
IP networks or IP subnets that the internet server does not
belong to. Doing this enables computers on the same IP
network as the internet server to communicate with the
computers on the other local IP networks or IP subnets.
If your router has its own connection to the internet
then you must create a new IP network or IP subnet. All
computers on the new IP network will use the internet
server to access the internet. Computers remaining on the
preexisting IP network will continue to use the router for
internet access. In this configuration, the internet server
can ease the burden for internet bandwidth on the router.
However, for computers on the new IP network to commu-
nicate with computers on the old one, you must create a
static route in the internet server's routing table. When do-
ing this, the IP address of the static route will be the
preexisting IP address and the gateway will be the LAN
port of the router.
Note: If you are creating a second IP network, do not allow
the internet server to use DHCP if the router is also using
DHCP, unless the router is supplying IP addresses on only
one port and the internet server is not connected to that
port.

Filter NetBIOS over TCP/IP

As the name implies, this feature allows you to filter
NetBIOS traffic when it is transmitted over TCP/IP. This
can prevent NetBIOS domain name queries, for example,
from initiating a dial-up connection.
44 Configuration Settings