Table of Contents
Advertisement
The internet server should be placed high enough where
LED indicators can be observed and cable and power con-
nections can be made.
Moreover, decide whether you would like it to point with
the front panel facing either up or down.
Drill two holes into the wall with the same distance as the
screw support holes located on the bottom of the internet
server. Do not drill these holes too deep.
Insert the nylon anchors into the holes in the wall and imbed
them with gentle taps of a hammer.
Screw in the screws provided with the wall mount kit into the
plastic anchors.
torque. The screw's head and with a small portion of the
screw's body should be sticking out.
Gently, place the internet server onto the wall with the front
panel facing up or down by sliding the screws into the provided
slots on the underside of the unit.
Installation
Do not insert the screws with excessive
Installing the Internet Server on a Wall
Internet Server User' s Guide
7
Advertisement
Table of Contents
