Isp Account -> Phone Number - D-Link DP-601M User Manual

Nway internet server with 56k modem
Table of Contents

Advertisement

Internet Server User' s Guide
vided by your ISP.
internet sites will only be available using IP addresses and will
not be available using URLs.)
Default Value: 0.0.0.0
Must Be User Modified? Yes.
Description: A Domain Name Service (DNS) server address is
used to translate URLs into their corresponding IP addresses.
ISP Account -> Phone Number
In order for the internet server to control the modem to dial the
phone, you must enter the dial-up phone number for your ISP. If
you need to dial an area code in order to call the number, it must be
included in this variable. If you must dial "#", 0, 9 or some other
number in order to get an outside phone connection, that information
must be included in how this variable is configured.
Options: For dial-up connections, the local ISP phone num-
ber, complete without spaces, hyphens or other punctuation
(except for commas which are used for a brief pause in dial-
ing). The maximum length is 20 characters.
Example: Your ISP phone number is a local call to 916-5555
and you must dial 0 in order to get an outside line from the of-
fice where you want to use the internet server. You would
enter 0,,9165555 as the "ISP Account -> Phone Number" set-
ting. The two commas instruct the modem to pause between
dialing the 0 and dialing the rest of the number. This pause is
necessary if there is normally a moment or two between dial-
ing 0 and getting an outside dial tone.
Default Value: (none)
Must Be User Modified? Yes.
22
(Note that without a DNS server IP,
System Setup

Advertisement

Table of Contents
loading

Table of Contents