Install/Remove Hard Drive - D-Link DIR-685 User Manual

Secton  - Installaton
D-Lnk DIR-685 User Manual

Install/Remove Hard Drive

To.install.a.hard.drive:
1. Open the hard drive bay. The router can be powered on during
2. Insert your hard drive into the bay with the label facing towards
3. Push hard drive firmly in the bay.
4. Close the hard drive bay door.
5. The Detect.Hard.Drive.Success message will appear. Press
To.remove.a.hard.drive:
Warning: Do NOT eject the hard drive without pressing the
unmount button below the hard drive bay.
1. Open the hard drive bay door.
2. Press the unmount button.
3. Once the unmount button is amber/orange, press the eject
Caution: Hard drive may be hot. Use caution when handling.
4. Pull the hard drive out.
installation.
the back of the router.
the center button to continue.
button located on the opposite side.