Guest Zone - D-Link DIR-685 User Manual

Secton  - Configuraton
The Guest Zone feature will allow you to create temporary zones that can be used by guests to access the Internet.
These zones will be separate from your main wireless network.
Enable Guest Zone: Tick this checkbox to enable the Guest Zone feature.
Wireless Network Enter a wireless network name (SSID) that is different from your
Name:
main wireless network.
Security Mode:
Select the type of security or encryption you would like to enable
for the guest zone.
Router IP Address: Type the IP Address that the router will use for the Guest Zone
network.
Default Subnet
Type the Subnet Mask that the router will use for the Guest Zone
Mask:
network.
Enable Guest Zone Tick this checkbox to prevent guest clients accessing other guest
Client Isolation: clients in the Guest Zone. Ticking this option only allows guest clients
to access the Internet.
Enable Routing
Tick this checkbox to allow network connectivity between the
Between Zones:
different zones created.
DHCP Server Tick the Enable.DHCP.Server checkbox to configure the built-in
Settings for Guest DHCP server to assign IP addresses to computers in the Guest
Zone: Zone.
Specify the range of IP addresses that will be assigned to computers
in the Guest Zone in the DHCP IP Address Range fields. Type the
last IP octet of the first host in the range in the textbox on the left
and the last IP octet of the last host in the range in the textbox on
the right.
D-Lnk DIR-685 User Manual

Guest Zone

56