Ftp Server - D-Link DIR-685 User Manual

Secton  - Configuraton
The DIR-685 is equipped with a built-in FTP Server, which is easy to configure. It allows users access to important
data whether they are on the local network or at a remote location. The FTP server can be configured to allow user
access to specific directories, and will allow up to ten users to access the DIR-685 at a time. For improved security, the
DIR-685 supports use of an FTPS client, such as SSL/TLS, to encrypt both the password and the data. The DIR-685
supports FireFTP, a cross-platform FTP client for Mozilla Firefox

FTP Server

This section contains the user and group configuration settings
Settings:
for access to the FTP folder to the DIR-685.
Category:
Determines whether the FTP server rule will apply to an
individual user or a group.
User/Group:
Select the user or group the FTP server rule will apply to.
Folder:
Browse to open and select the folder or directory you are
granting FTP access to. Select root. to. grant access to all
volumes.
Permission:
Set the user or group permission to Read. Only or RW:
Read/Write.
Enable FTP: Select Enable to enable the FTP server.
Mode:
Select LAN, WAN, or LAN+WAN.
Max User:
Sets the maximum amount of users that can connect to the
FTP server.
Idle Time:
Sets the amount of time a user can remain idle before being
disconnected.
D-Lnk DIR-685 User Manual
FTP Server
users.
™
68