Time Settings - D-Link DIR-685 User Manual

Secton  - Configuraton
The Time configuration option allows you to configure, update, and maintain the correct time on the internal system
clock. From this section, you can set the time zone that you are in and set the time server. Daylight saving can also be
configured to automatically adjust the time when needed.
Time Zone:
Select the Time Zone from the drop-down
menu.
Daylight Saving: To select Daylight Saving time manually, select
enabled or disabled, and enter a start date and
an end date for daylight saving time.
Enable NTP NTP is short for Network Time Protocol. NTP
Server:
synchronizes computer clock times in a network
of computers. Check this box to use an NTP
server. This will only connect to a server on the
Internet, not a local server.
NTP Server Used:
Select an NTP server from the drop-down
menu.
Manual:
To manually input the time, make sure the
Automatically synchronize with D-Link's Internet
time server box is unchecked. Select the Year,
Month, Day, Hour, Minute, and Second from the
drop-down menus. Click Save.Settings to save
and activate your settings.
D-Lnk DIR-685 User Manual

Time Settings

8