Static (Assigned By Isp) - D-Link DIR-685 User Manual

Secton  - Configuraton
Select Static IP Address if all the connection information is provided to you by your ISP. You will need to enter in the IP address, subnet
mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate
IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
IP Address:
Enter the IP address assigned by your ISP.
Subnet Mask:
Enter the Subnet Mask assigned by your ISP.
Default Gateway:
Enter the Gateway assigned by your ISP.
DNS Servers:
The DNS server information will be supplied by
your ISP.
MTU:
Maximum Transmission Unit - you may need to
change the MTU for optimal performance with your
specific ISP. The default MTU is 1500.
MAC Address:
The default MAC Address is set to the Internet port's
physical interface MAC address on the Broadband
Router. It is not recommended that you change the
default MAC address unless required by your ISP.
You can use the Clone.Your.PC's.MAC.Address
button to replace the Internet port's MAC address
with the MAC address of your Ethernet card.
D-Lnk DIR-685 User Manual
Internet Setup

Static (assigned by ISP)