Statically Assign An Ip Address; D-LNk Dir-685 User Manual - D-Link DIR-685 User Manual

Appendx B - Networkng Bascs

Statically Assign an IP address

If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps
below:
Step.1
Windows Vista - Click on Start > Control.Panel > Network.and.Internet > Network.and.Sharing.Center > Manage.
®
Network.Connections.
Windows XP - Click on Start > Control.Panel > Network.Connections.
®
Windows 2000 - From the desktop, right-click My.Network.Places > Properties.
®
Step.2
Right-click on the Local.Area.Connection which represents your D-Link network adapter and select Properties.
Step.3
Highlight Internet.Protocol.(TCP/IP) and click Properties.
Step.4
Click Use.the.following.IP.address and enter an IP address that is on the same
subnet as your network or the LAN IP address on your router.
Example: If the router´s LAN IP address is 192.168.0.1, make your IP address
192.168.0.X where X is a number between 2 and 99. Make sure that the number
you choose is not in use on the network. Set Default Gateway the same as the LAN
IP address of your router (192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The
Secondary DNS is not needed or you may enter a DNS server from your ISP.
Step.5
Click OK twice to save your settings.

D-Lnk DIR-685 User Manual