Securing Stove Pipe/Liner To Flue Collar; Leveling Legs; Securing Appliance To Stove Pipe/Liner - Quadra-Fire 27I-ACC Installation Manual

2700 Insert ACC
B. Securing Stove Pipe/Liner to Flue Collar
1. There are 4 already drilled holes in the flue collar 90
degrees apart. Attach the flue collar to the stove pipe/
liner. f the seal is questionable use high temperature
sealant such as stove mastic (Figure 18.1).
2. Attach gasket to bottom side of flue collar with a thin
coat of silicone.
Flue Collar
Figure 18.1
C. Leveling Legs
1. Remove the 2 screws already installed on each leg.
2. Move legs to the desired height.
3. Re-install the screws to secure in place.
Remove 2 screws from both sides.
Adjust the legs up or down to level
appliance.
Figure 18.2
18
Gasket
Stove Pipe/Liner
7046-192I
D. Securing Appliance to Stove Pipe/Liner
1. Once you have the appliance in place and secured,
reach up through the flue opening and grab the
attachment bar and pull down inside flue opening
(Figure 18.3).
2. Insert the 5/16 bolts inside the cast flue and through
the chimney mounting bar. Securely tighten the nuts.
Fasteners are provided.
3. Re-install the tube channel assembly, baffle board,
ceramic blanket and baffle protection channel.
5/16 Nuts
Figure 18.3
5/16 Bolts
Attachment Bar
November 22, 2019