D-Link AirPro DI-764 Manual page 31

2.4 ghz / 5 ghz multimode wireless broadband router

Hide thumbs Also See for AirPro DI-764:

Table of Contents

Using the Configuration Menu

Advanced > Performance > 802.11b+

Wireless

Performance-

Beacon interval-

RTS Threshold-

Fragmentation-

DTIM interval-

Basic Rates-

TX Rates-

Select 802.11a or 802.11b+. 802.11b+ is selected here. Dis-

played in this window are the Wireless Performance features

for the Access Point portion of the DI-764.

beacons are packets sent by the DI-764 to synchronize a wire-

less network. Specify a value. 100 is the default setting and is

recommended.

this value should remain at its default setting of 2342. If incon-

sistent data flow is a problem, only a minor modification should

be made.

this value should also remain at its default setting of 2346. If

you experience a high packet error rate, you may slightly in-

crease your Fragmentation value within the range of 256-2346.

Setting the Fragmentation value too low may result in poor per-

formance.

(Delivery Traffic Indication Message) 3 is the default setting. A

DTIM is a countdown informing clients of the next window for

listening to broadcast and multicast messages.

choose from1-2Mbps; 1,2,5.5,11 Mbps; or 1,2,5.5,11,22 Mbps

select the basic transfer rates based on the speed of the wire-

less adapters on the WLAN (wireless local area network);

choose from among the same ranges as those listed in the Basic

Rates,above.

Table of Contents