D-Link AirPro DI-764 Manual page 18

Using the Configuration Menu
Home > WAN > PPPoE continued
Primary
DNS Address-
Secondary
DNS Address-
Maximum
Idle Time-
MTU-
Auto-reconnect-
Apply-
Home > LAN
LAN is short for Local Area Network. This is considered your internal network. These
are the IP settings of the LAN interface for the DI-764. These settings may be referred
to as Private settings. You may change the LAN IP address if needed. The LAN IP
address is private to your internal network and cannot be seen on the Internet.
IP Address-
Subnet Mask-
Local
Apply-
get this info from your ISP
optional
enter a maximum idle time during which internet connection is
maintained during inactivity. To disable this feature, enter zero
or enable Auto-reconnect.
Maximum Transmission Unit-1472 is default-you may need to
change the MTU to conform with your ISP.
if enabled, the DI-764 will automatically connect to your ISP
after your system is restarted or if the connection is dropped.
click Apply to save the changes.
the IP address of the LAN interface. The default IP address is:
192.168.0.1
the subnet mask of the LAN interface.
The default subnet mask is 255.255.255.0
optional
click Apply to save the changes.
18